Add to cart
  • Description
  • More

Also called a Dual to Multi Point Conversion Harness. Required when swapping on a 88-91 Civic/ CRX "DX" Model *Core Required. For D16, B16A, B17A B18, & ZC Swaps. Note: Standard harness does not include VTEC wiring so if you are going to be wiring in VTEC your self or not using a VTEC motor select standard harness conversion. If you are running a VTEC engine & would like for us to add a VTEC sub-harness for you that can be done at an additional cost by selecting swap type below.

Please note that for OBD1 conversions you will still need to use an OBD0 to OBD1 ECU conversion harness.

*This item ( 88-91 Honda Civic/ CRX dual to multipoint conversion harness) requires a core. Core Harnesses must be shipped to the address below before purchased item is shipped to buyer, for more information or questions regarding cores please call us at (626) 261-4052

Shipping address: Swap ShopRacing * 650 North Barranca ave #A * Covina, Ca 91723

You will send us your 88-91 Dual Point engine harness, and the engine harness  that came on your new engine and we will send you back your harness modified for your new swap.

Shipping:
You pay shipping of your core harness to us, and select your return shipping method upon checkout. Our address is: 650 N. Barranca Ave #A, Covina, CA, 91723

Notes:
We will de-pin plugs where possible, and solder/heatshrink where we cannot de-pin. You will have to follow some easy instructions for further modification at the ECU. There are a few wires that need to be pinned into the ECU plugs. If you choose to use Low-Impedance Injectors (H22A, D16A, B18A Swaps) you will need an injector resistor box.


*What we need from you:
- Un-modified and un-cut 88-91 Honda Civic/ CRX engine harness
- A B16A, B18C, B18A, B18B, D16, or H22A engine harness (must match your engine,). Note this harness while we would prefer to be complete, often times are cut on your new engine that is ok as long as the plugs are intact.
Both are required. If you do not have a core Engine Harness contact us by phone or email.

*SSR (Swap Shop Racing) is our House Brand

If you have purchased one of these from us please visit the following link for help with your install:

http://www.youtube.com/watch?v=sku2q9MVXB0

Please Note that we only do harness for M/T Swaps. *SSR H-Series Swap Harness' are compatible with the following ECU's: P28/ P30/ P72/ P73. Other ECU's may require further harness modification or may not be compatible. Please allow at least 10 business days for this harness to be completed from the time we receive both your payment and cores. If you are not sending in a core and have chosen the "I do not have a core" option please allow an extra 2-3 business days to this lead time.

Related Products